Linksys Wireless PrintServer WPS11 Instrukcja Użytkownika

Instant Wireless™SeriesWireless PrintServerUse this Guide to install:Model No.:WPS11User Guide

1413Bi-Admin: PrintServer ManagementOverviewThe Wireless PrintServer is managed by a utility program called Bi-Admin onthe Wireless PrintServer’s Setu

1615Obtaining Device Information:The Device Information Icon To access information about the Wireless PrintServer,either click on it in the Device Li

1817The Wireless PrintServer comes with a default device name printed on the bot-tom of the unit, and always starting with the prefix SC (example: SC4

Logical Port Configuration:Logical Port Configuration Icon To set or change the Wireless PrintServer’s logical port set-tings, highlight the Wireless

When the Configure Server screen appears, enter the Wireless PrintServername (in the example shown here SCA71107). Then enter your password (ifyou cr

Click the Wireless tab to allow you to view information about the WirelessPrintServer. No values can be changed on this screen. This screen is for i

Advanced PropertiesThe Advanced Properties section of the Web-based Utility is for users who havea thorough understanding of networks and network sett

Click the Logical Printers tab to view or change the logical printer settings ofthe Wireless PrintServer. For each Logical Printer, the following fie

Click the SNMP tab to view or change the SNMP settings of the WirelessPrintServer. The Wireless PrintServer supports SNMP (Simple Network ManagementP

Internet Printing Protocol (IPP)IPP (Internet Printing Protocol) is a new standards-based system to allowremote printing from a PC to any accessible p

COPYRIGHT & TRADEMARKS Copyright © 2001 Linksys, All Rights Reserved. Microsoft, Windows, and the Windowslogo are registered trademarks of Microso

5. Click Save to create the IPP port on your system. You will see a message con-firming that the port has been created, then the following dialog: 6.

2. Select Network Printer and click Next to see the Locate your Printer screen,as shown below. 3. Select Connect to a printer on the Internet or on yo

38DHCP Support for the WirelessPrintServerTo use DHCP, which assigns non-static IP addresses, you must have a DHCPserver and DHCP management software.

AppendixNormal printing only sends print signals from a PC to a printer. Bi-direction-al printing, also called bitronic printing, refers to a printer&

printer status, do not use it with the Wireless PrintServer - the software is mostlikely not network-capable. For best results, turn off the printer’s

Ethernet - IEEE standard network protocol that specifies how data is placedon and retrieved from a common transmission medium. Has a transfer rate of1

NetBIOS - The native networking protocol in DOS and Windows networks.Although originally combined with its transport layer protocol (NetBEUI),NetBIOS

TCP/IP - Transmission Control Protocol/Internet Protocol (TCP/IP) is thebasic communication language or protocol of the Internet. It can also be useda

EnvironmentalDimensions: 5.91” x 8.66” x 1.18”(150mm x 220mm x 30mm)Unit Weight: 5.6 oz. (0.16 kg)Power: External, 12V DC, 800mACertifications: FCC Cl

5251Contact InformationFor help with the installation or operation of this product, contact LinksysCustomer Support at one of the phone numbers or Int

Table of ContentsIntroduction 1The Instant Wireless™ Wireless PrintServer 1Features 1Package Contents 2Getting to Know the Wireless PrintServer 3The W

© Copyright 2001 Linksys,All Rights Reserved.http://www.linksys.com

• One Instant Wireless™ Wireless PrintServer• One Antenna (Not Shown)• One Setup Utility CD • One Power Adapter• One User Guide on Setup Utility CD (N

4LAN This port connects to your wired network using astandard Category 5 network cable.Printer This Parallel (LPT) Port connects to your printer.Reset

6Connecting the Wireless PrintServer to Your Network1. After powering on the Wireless PrintServer, plug one end of a UTPCategory 5 (or better) cable

1. To begin driver installation, click the Start button, select Run, and typeD:\Driver\Win9xnt\AddPort_Linksys.exe (where D is the letter of yourCD-R

105. Driver installation is now completed but the Print Driver still needs to beconfigured. The Wireless-Ready PrintServer will not function properly

12119. The Add New Printer Wizard will come up at this point. Follow the stan-dard procedure for adding printers under Windows. If you have any ques-